Please wait while the page loads...

Ford Transit Van Check Engine Light Flashing

Although there are bountiful potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are innumerable active causes encompassing something as specific as a loose gas cap. Alternative active reasons for a Check Engine Light are faulty emissions control part, a malfunction with the fuel injection system, dirty mass airflow sensor, damaged oxygen sensor, faulty head gasket, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ford Certified Technicians and the certified service protocol to isolate the root problem and repair it as mandatory to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ford issue was repaired.

Every Ford Transit Van was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its hard systems. The sensors are continually detecting conditions while sending data to the electronic control squad. If the electronic control squad detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is awry nor what to do about it. That’s where we come in; Coggin Ford Jacksonville provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service experienced.

What could cause the check engine light to come on in a Ford Transit Van?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a strict problem that could cause strict damage to your engine and come with a curious repair bill. Depending on your make and model, the check engine light will illuminate or blink. A consistent glow naturally means something less strict but a flashing check engine light indicates that your vehicle’s engine is in strict trouble and service is fundamental immediately. If your check engine light is flashing in your Ford Transit Van, we exceptionally advocate not to drive the vehicle and schedule Ford service today. Below is a list of the most traditional reasons your check engine light can come on:

  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ford Transit Van is what determines how much fuel is decisive to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to important changes, like altitude. If your Ford Transit Van is having trouble starting, idling rough or has a hasty change in the position of the throttle pedal, this could be a sign of a contentious mass airflow sensor.
  • One of the most normal and frequent cause is that your Ford Transit Van gas cap is loose, damaged or missing. The gas cap for your Ford Transit Van serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a contentious fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on promptly after you put gas in your Ford Transit Van, first thing you should check is to make fearless the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your catalytic converter is contentious or going contentious. The catalytic converter is a part of your Ford Transit Van’s exhaust system. The catalytic converter's work is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Coggin Ford Jacksonville offers a complimentary multi-point inspection with every Ford service. If you have an issue with your catalytic converter and don't get it fixed, your Ford Transit Van will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause contrasting problems from overheating.
  • Your Ford Transit Van has a vacuum leak. Every Ford Transit Van has a vacuum system that performs a wide variety of functions. The vacuum system also helps lessen harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to astonishing heat or extreme congenial.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less legitimate when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause break to your catalytic converter and your Ford Transit Van's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to advocate the right alter of air and fuel that enters the cylinders in your engine. A contentious O2 sensor can also cause a vehicle to fail an emissions test.
  • New Spark Plugs or Plug Wires are decisive for your Ford Transit Van. The spark plugs are the part of your engine that ignites the air/fuel alter in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are contentious or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or break to ignition coils and O2 sensors, best to more expensive repairs.
  • The battery is low or dead. The battery in your Ford Transit Van is every unusual. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a few decades ago, and they don't certainly require maintenance. The price of a new one depends on the type of Ford you drive, but check our current service coupons and specials.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or contrasting item can wreak havoc on your Ford Transit Van if it’s not installed properly. These aftermarket parts and accessories can discharge the battery, trigger the check engine light, or even prohibit the vehicle from starting. If these issues sound modern, bring your Transit Van to Ford and have our company of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could save you money from having to get poor work and break caused by poor installation work corrected.

Is it safe to drive your Ford Transit Van with the check engine light on?

If the check engine light is flashing, this means that there is a risky issue and it is recommended to service your Ford Transit Van immediately. This question is not especially pure because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is consistently indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more precarious problem. Call the experts at Coggin Ford Jacksonville by dialing 9047478996 so you can describe the issues. Or reduce your speed and bring your Ford to our certified mechanics as soon as available.

Ford Transit Van Check Engine Light

A shining light implies that the problem is hazardous and if not taken care of shortly may result in big damage to the vehicle. If the check engine light in your Ford Transit Van starts shining, that means that the problem needs hasty attention and your Ford should be brought in shortly. This blinking light generally hints a serious engine misfire allowing unused fuel to be dumped into the exhaust system. There it can shortly increase the temperature of the catalytic converter to a point where damage is achievable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A harmful, former or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our department of automotive experts at Coggin Ford Jacksonville urgently by calling 9047478996. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

How much does it cost to get the engine light checked?

The central cost for a check engine light diagnosis & testing is typically between $88 and $111. The superb news, Coggin Ford Jacksonville offers complimentary multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more great failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it superb to get the ready code reading and diagnosis.

What Does the Check Engine Light Mean?

One of the most continually misunderstood lights or indicators in your Ford Transit Van is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few diverse ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a assortment of things for your Ford Transit Van. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can mean a range of contrasting things. It can be as authentic as your gas cap being loose or as adequate as engine knocking. If your check engine light is on in your Ford Transit Van, contact Coggin Ford Jacksonville. Contact Coggin Ford Jacksonville today! Our Ford service department can help you find out what code is turning your check engine light on or investigate why your check engine light is flashing.

Check Engine Light Service Ford Transit Van

What do you do when you’re driving along in your Ford Transit Van and abruptly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ford owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your Ford Transit Van checked as soon as probable. Ignoring that warning could end up causing large damage to expensive engine elements.

When your Ford Transit Van's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the computerized control system that it can’t honorable, a computer turns on your check engine light. This amber or yellow light is frequently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Ford auto repair mechanics at Coggin Ford Jacksonville. There are also a number of rather inexpensive code readers that are designed for do-it-yourselfers, should you favor that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an trained effective to find out the issue and repair it.

Will the check engine light reset itself?

The check engine light on your Ford Transit Van will commonly shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did assorted of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your Ford Transit Van light will go off after about 20-40 miles. If you commute over that amount and the light is still on, you will need to bring it in to Coggin Ford Jacksonville so the light and code can be double-checked and reset.

Ford Transit Van Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that meager light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also popular as the OBD (on-board computer diagnostic system) in your Transit Van. There are hundreds of diversified codes that your check engine light can suggest. While that sounds daunting, with a meager patience, tackling crucial diagnostics will give you helpful knowledge about your vehicle and will also allow that Check Engine Light to do what it is genuinely supposed to do: be your guide. Unfortunately, assorted and exciting vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of realistic OBD codes, there are also hundreds of realistic reasons for the light, including:

  • Loose Gas Cap or Missing Gas Cap
  • Emissions controls issues
  • Ignition system faults
  • Old Battery
  • Transmission issues
  • Fuel and air metering systems problems
  • Bad Spark Plugs
  • Computer output circuit issues
  • O2 Sensor

This is why it is respectable for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Coggin Ford Jacksonville at 9047478996 today or schedule your check engine light service online today! If the engine light comes on due to a relentless concern, you risk harmful your automobile further by not repairing the issue right away. When your check engine light comes on, you should get it checked out expeditiously by a certified Ford mechanic.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accurately. If you check engine light is shining, we advocate that you pull over and contact Coggin Ford Jacksonville to help mean if your vehicle is safe to commute in or if we advocate a tow truck. It could be anything from a bad sensor to plug wires needing to be replaced. Since each check engine code has its own level of severity, it is harsh to predict how several miles you can commute with the warning light on.