Please wait while the page loads...

How many miles can you drive with the check engine light?

It could be anything from a harmful sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is not comfortable to predict how many miles you can drive with the warning light on. If you check engine light is flashing, we suggest that you pull over and contact Coggin Ford Jacksonville to help opt for if your vehicle is reliable to drive in or if we suggest a tow truck.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not correctly tightened to a more relentless failure like a detrimental catalytic converter or a problem with one of the car's oxygen sensors, so it fitting to get the useful code reading and diagnosis. The average cost for a check engine light diagnosis & testing is commonly between $88 and $111. The fitting news, Coggin Ford Jacksonville offers complimentary multi-point inspections and free diagnostics, in most cases, to help suggest the cause of your check engine light.

Check Engine Light Service Ford Ranger

What do you do when you’re driving along in your Ford Ranger and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ford owners, your heart sinks a tiny because you have tiny idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your Ford Ranger checked as soon as adequate. Ignoring that warning could end up causing extensive damage to fancy engine components.

When your Ford Ranger's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t decent, a computer turns on your check engine light. This amber or yellow light is generally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic diagnose tool that is used by our Ford auto repair mechanics at Coggin Ford Jacksonville. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you prefer that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an trained professional to learn the issue and repair it.

Is it safe to drive your Ford Ranger with the check engine light on?

This question is not incredibly curious because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to commute. This is frequently indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more emotional problem. If the check engine light is shining, this means that there is a emotional issue and it is recommended to service your Ford Ranger quickly. Call the experts at Coggin Ford Jacksonville by dialing 9047478996 so you can describe the issues. Or decrease your speed and bring your Ford to our certified mechanics as soon as achievable.

Ford Ranger Check Engine Light Flashing

Although there are countless possible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several instinctive causes including something as effortless as a loose gas cap. Distinctive instinctive reasons for a Check Engine Light are faulty head gasket, faulty emissions control part, dirty mass airflow sensor, a malfunction with the fuel injection system, damaged oxygen sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ford Certified Technicians and the certified service protocol to isolate the root problem and repair it as fundamental to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ford issue was fixed.

Every Ford Ranger was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its hard systems. The sensors are continuously detecting conditions while sending data to the computerized control unit. If the computerized control unit detects that the data is out of factory specifications, the Check Engine Light lights up telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what precisely is untrue nor what to do about it. That’s where we come in; Coggin Ford Jacksonville provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Exceedingly Qualified Service mechanical.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your Ford Ranger is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few distinctive ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light brightens in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your Ford Ranger. Some of these include shifting automatic transmissions ignition timing, controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of firm things. It can be as natural as your gas cap being loose or as persuasive as engine knocking. If your check engine light is on in your Ford Ranger, contact Coggin Ford Jacksonville. Our Ford service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is blinking. Contact Coggin Ford Jacksonville today!

Ford Ranger Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly flashes, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just additional name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Ranger. There are hundreds of distinct codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling imperative diagnostics will give you available knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, convincing and delightful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of attainable OBD codes, there are also hundreds of attainable reasons for the light, including:

  • Transmission issues
  • Bad Spark Plugs
  • O2 Sensor
  • Old Battery
  • Computer output circuit issues
  • Ignition system faults
  • Fuel and air metering systems problems
  • Loose Gas Cap or Missing Gas Cap
  • Emissions controls issues

This is why it is critical for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out quickly by a certified Ford mechanic. Call Coggin Ford Jacksonville at 9047478996 at this moment or schedule your check engine light service online today! If the engine light comes on due to a dangerous concern, you risk damaging your car added by not repairing the issue right away.

Ford Ranger Check Engine Light

If the check engine light in your Ford Ranger starts blinking, that means that the problem needs immediate attention and your Ford should be brought in hastily. A blinking light indicates that the problem is alarming and if not taken care of hastily may result in direct damage to the vehicle. This glaring light usually indicates a exacting engine misfire allowing unused fuel to be dumped into the exhaust system. There it can instantly raise the temperature of the catalytic converter to a point where damage is potential, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can certainly be the cause. A bad, former or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive experts at Coggin Ford Jacksonville shortly by calling 9047478996. If the problem is ignored or you continue to commute, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

Will the check engine light reset itself?

The check engine light on your Ford Ranger will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did various of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your Ford Ranger light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Coggin Ford Jacksonville so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a Ford Ranger?

When your check engine light comes on, this could be as discernible as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a alarming problem that could cause alarming wear and tear to your engine and come with a powerful repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow typically means something less alarming but a flashing check engine light implies that your vehicle’s engine is in alarming trouble and service is basic hastily. If your check engine light is flashing in your Ford Ranger, we extraordinarily advocate not to drive the vehicle and schedule Ford service today. Below is a list of the most current reasons your check engine light can come on:

  • Your Ford Ranger has a vacuum leak. Every Ford Ranger has a vacuum system that performs a wide assortment of functions. The vacuum system also helps lower bad emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can parched out and crack, especially if they’re exposed to imposing heat or extreme bitter.
  • One of the most adequate and frequent cause is that your Ford Ranger gas cap is loose, damaged or missing. The gas cap for your Ford Ranger serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on expeditiously after you put gas in your Ford Ranger, original thing you should check is to make hopeful the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • New Spark Plugs or Plug Wires are essential for your Ford Ranger. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, best to more expensive repairs.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or additional item can wreak havoc on your Ford Ranger if it’s not installed accordingly. These aftermarket parts and accessories can deposit the battery, trigger the check engine light, or even avert the vehicle from starting. If these issues sound commonplace, bring your Ranger to Ford and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts original place might price a small bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • The battery is low or dead. The battery in your Ford Ranger is every nice. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did frequent decades ago, and they don't really require maintenance. The price of a new one depends on the type of Ford you drive, but check our current service coupons and specials.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your Ford Ranger’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Coggin Ford Jacksonville offers a complimentary multi-point inspection with every Ford service. If you have an issue with your catalytic converter and don't get it repaired, your Ford Ranger will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause additional problems from overheating.
  • Your O2 Sensor (Oxygen Sensor) needs to be changed. The Oxygen sensor, well-known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less handy when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your Ford Ranger's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to mean the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your mass airflow sensor (known as MAF) needs to be changed. The mass airflow sensor in your Ford Ranger is what determines how much fuel is essential to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to clear changes, like altitude. If your Ford Ranger is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.