Please wait while the page loads...

Will the check engine light reset itself?

The check engine light on your 2019 Ford Focus will usually shut itself off if the issue or code that caused it to turn on is serviced. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did assorted of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2019 Ford Focus light will go off after about 20-40 miles. If you commute over that amount and the light is still on, you will need to bring it in to Coggin Ford Jacksonville so the light and code can be double-checked and reset.

2019 Ford Focus Check Engine Light Flashing

Although there are many potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several commonplace causes comprising something as simple as a loose gas cap. Disparate commonplace reasons for a Check Engine Light are a malfunction with the fuel injection system, faulty head gasket, damaged oxygen sensor, dirty mass airflow sensor, faulty emissions control part, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ford Certified Technicians and the certified service protocol to isolate the root problem and repair it as crucial to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ford issue was fixed.

Every 2019 Ford Focus was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its laborious systems. The sensors are continuously detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what strictly is wrong nor what to do about it. That’s where we come in; Coggin Ford Jacksonville provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service high-tech.

Is it safe to drive your 2019 Ford Focus with the check engine light on?

If the check engine light is glaring, this means that there is a draconian issue and it is recommended to service your Ford Focus immediately. This question is not very accepted because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is constantly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more draconian problem. Call the consultants at Coggin Ford Jacksonville by dialing 9047478996 so you can describe the issues. Or reduce your speed and bring your 2019 Ford to our certified mechanics as soon as direct.

2019 Ford Focus Check Engine Light

A flashing light suggests that the problem is unhealthy and if not taken care of immediately may result in major damage to the vehicle. If the check engine light in your 2019 Ford Focus starts flashing, that means that the problem needs speedy attention and your Ford should be brought in immediately. This blinking light commonly indicates a severe engine misfire allowing unused fuel to be jettisoned into the exhaust system. There it can instantly expand the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A harmful, traditional or dirty spark plug can cause the engine to misfire. If your check engine light is shining, please contact our team of automotive mentors at Coggin Ford Jacksonville quickly by calling 9047478996. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a extremely lavish repair.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more hazardous failure like a destructive catalytic converter or a problem with one of the car's oxygen sensors, so it fitting to get the fair code reading and diagnosis. The average cost for a check engine light diagnosis & testing is often between $88 and $111. The fitting news, Coggin Ford Jacksonville offers complimentary multi-point inspections and free diagnostics, in most cases, to help suggest the cause of your check engine light.

What could cause the check engine light to come on in a 2019 Ford Focus?

When your check engine light comes on, this could be as uncomplicated as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a alarming problem that could cause alarming damage to your engine and come with a colossal repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow naturally means something less alarming but a glaring check engine light indicates that your vehicle’s engine is in alarming trouble and service is fundamental shortly. If your check engine light is glaring in your 2019 Ford Focus, we remarkably recommend not to commute the vehicle and schedule Ford service today. Below is a list of the most beneficial reasons your check engine light can come on:

  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your car will be fewer handy when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2019 Ford Focus's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the noble variety of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • The battery is low or dead. The battery in your 2019 Ford Focus is every vital. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did various decades ago, and they don't really require maintenance. The cost of a new one depends on the type of Ford you drive, but check our existing service coupons and specials.
  • Your 2019 Ford Focus has a vacuum leak. Every Ford Focus has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to exciting heat or extreme cold.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or alternative item can wreak havoc on your 2019 Ford Focus if it’s not installed accurately. These aftermarket parts and accessories can discard the battery, trigger the check engine light, or even avoid the car from starting. If these issues sound aware, transport your Focus to Ford and have our team of certified mechanics ensure that your aftermarket items were installed well and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a miniature bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ford Focus is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to clear changes, like altitude. If your Ford Focus is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • New Spark Plugs or Plug Wires are needed for your 2019 Ford Focus. The spark plugs are the part of your engine that ignites the air/fuel variety in the combustion chamber of your car. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or classic, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, principal to more expensive repairs.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2019 Ford Focus’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is frequently caused by neglected maintenance, which is why Coggin Ford Jacksonville offers a complimentary multi-point inspection with every Ford service. If you have an issue with your catalytic converter and don't get it repaired, your 2019 Ford Focus will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause alternative problems from overheating.
  • One of the most aware and copious cause is that your 2019 Ford Focus gas cap is loose, damaged or missing. The gas cap for your 2019 Ford Focus serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is classic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on expeditiously after you put gas in your 2019 Ford Focus, first thing you should check is to make positive the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.

What Does the Check Engine Light Mean?

One of the most usually misunderstood lights or indicators in your 2019 Ford Focus is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few disparate ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2019 Ford Focus. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can hint a mixture of alternative things. It can be as prevalent as your gas cap being loose or as miraculous as engine knocking. If your check engine light is on in your 2019 Ford Focus, contact Coggin Ford Jacksonville. Our Ford service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Coggin Ford Jacksonville today!

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is hard to predict how copious miles you can travel to work with the warning light on. It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is flashing, we recommend that you pull over and contact Coggin Ford Jacksonville to help mean if your automobile is careful to travel to work in or if we recommend a tow truck.

Check Engine Light Service 2019 Ford Focus

What do you do when you’re driving along in your Ford Focus and quickly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ford owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t imply you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2019 Ford Focus checked as soon as feasible. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2019 Ford Focus's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t honest, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an mechanical probe tool that is used by our Ford auto repair mechanics at Coggin Ford Jacksonville. There are also a number of somewhat inexpensive code readers that are designed for do-it-yourselfers, should you select that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to mean the issue and repair it.

2019 Ford Focus Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that small light on your vehicle’s dashboard expeditiously illuminates, but in reality, it is not something that should cause you to shut down in fear prudent away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Focus. There are hundreds of distinctive codes that your check engine light can suggest. While that sounds daunting, with a small patience, tackling considerable diagnostics will give you essential knowledge about your vehicle and will also allow that Check Engine Light to do what it is truly supposed to do: be your guide. Unfortunately, remarkable and cooperative vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of convenient OBD codes, there are also hundreds of convenient reasons for the light, including:

  • Loose Gas Cap or Missing Gas Cap
  • Bad Spark Plugs
  • Old Battery
  • Computer output circuit issues
  • Fuel and air metering systems problems
  • Emissions controls issues
  • Ignition system faults
  • Transmission issues
  • O2 Sensor

This is why it is exciting for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a memorable concern, you risk damaging your car supplemental by not repairing the issue proper away. Call Coggin Ford Jacksonville at 9047478996 straightaway or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out quickly by a certified Ford mechanic.