Please wait while the page loads...

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is continually between $88 and $111. The exquisite news, Coggin Ford Jacksonville offers complimentary multi-point inspections and free diagnostics, in most cases, to help represent the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not subsequently tightened to a more serious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it exquisite to get the contractual code reading and diagnosis.

What could cause the check engine light to come on in a 2017 Ford Explorer?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a precarious problem that could cause precarious damage to your engine and come with a considerable repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow customarily means something less precarious but a flashing check engine light expresses that your vehicle’s engine is in precarious trouble and service is fundamental urgently. If your check engine light is flashing in your 2017 Ford Explorer, we extraordinarily advise not to drive the vehicle and schedule Ford service today. Below is a list of the most regular reasons your check engine light can come on:

  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2017 Ford Explorer’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Coggin Ford Jacksonville offers a complimentary multi-point inspection with every Ford service. If you have an issue with your catalytic converter and don't get it fixed, your 2017 Ford Explorer will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your automobile may run at a higher temperature, too, which can cause added problems from overheating.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or added item can wreak havoc on your 2017 Ford Explorer if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound natural, bring your Explorer to Ford and have our team of certified mechanics ensure that your aftermarket items were installed perfectly and aren't causing any issue. Getting accessories, chiefly aftermarket parts and accessories, or using OEM parts first place might cost a slight bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • One of the most admitted and frequent cause is that your 2017 Ford Explorer gas cap is loose, damaged or missing. The gas cap for your 2017 Ford Explorer serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is former or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on hastily after you put gas in your 2017 Ford Explorer, first thing you should check is to make hopeful the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your 2017 Ford Explorer has a vacuum leak. Every Ford Explorer has a vacuum system that performs a hefty variety of functions. The vacuum system also helps cut harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can parched out and crack, chiefly if they’re exposed to extraordinary heat or extreme cold.
  • New Spark Plugs or Plug Wires are needed for your 2017 Ford Explorer. The spark plugs are the part of your engine that ignites the air/fuel assortment in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or former, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, extensive to more expensive repairs.
  • The battery is low or dead. The battery in your 2017 Ford Explorer is every imperative. Without a automobile battery, your automobile won’t start, light up the road ahead, play the radio or charge your phone. Today’s automobile batteries last much longer than they did a few decades ago, and they don't genuinely require maintenance. The price of a new one depends on the type of Ford you drive, but check our extant service coupons and specials.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ford Explorer is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to hopeful changes, like altitude. If your Ford Explorer is having trouble starting, idling rough or has a precipitous change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, admitted as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less feasible when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2017 Ford Explorer's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the honorable assortment of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a automobile to fail an emissions test.

Is it safe to drive your 2017 Ford Explorer with the check engine light on?

If the check engine light is flashing, this means that there is a hazardous issue and it is recommended to service your Ford Explorer quickly. This question is not very detectable because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is customarily indicated by a steady glow of the check engine light. If you notice a difference in the performance of the automobile, it could be an indication of a more hazardous problem. Call the advisors at Coggin Ford Jacksonville by dialing 9047478996 so you can describe the issues. Or reduce your speed and bring your 2017 Ford to our certified mechanics as soon as conceivable.

Check Engine Light Service 2017 Ford Explorer

What do you do when you’re driving along in your Ford Explorer and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ford owners, your heart sinks a small because you have small idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t indicate you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2017 Ford Explorer checked as soon as feasible. Ignoring that warning could end up causing grand damage to lavish engine components.

When your 2017 Ford Explorer's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the mechanical control system that it can’t honorable, a computer turns on your check engine light. This amber or yellow light is consistently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic analyze tool that is used by our Ford auto repair mechanics at Coggin Ford Jacksonville. There are also a number of somewhat bargain code readers that are designed for do-it-yourselfers, should you pick that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to learn the issue and repair it.

2017 Ford Explorer Check Engine Light

A glaring light implies that the problem is strict and if not taken care of immediately may result in fundamental damage to the vehicle. If the check engine light in your 2017 Ford Explorer starts glaring, that means that the problem needs speedy attention and your Ford should be transported in immediately. This blinking light usually indicates a draconian engine misfire allowing unburned fuel to be discharged into the exhaust system. There it can quickly boost the temperature of the catalytic converter to a point where break is likely, requiring an lavish repair. Some owners ask if spark plugs cause the check engine light to flash? This can certainly be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is twinkling, please contact our team of automotive experts at Coggin Ford Jacksonville urgently by calling 9047478996.

Will the check engine light reset itself?

The check engine light on your 2017 Ford Explorer will often shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did bountiful of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2017 Ford Explorer light will go off after about 20-40 miles. If you commute over that fee and the light is still on, you will need to bring it in to Coggin Ford Jacksonville so the light and code can be double-checked and reset.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we recommend that you pull over and contact Coggin Ford Jacksonville to help represent if your vehicle is safe to drive in or if we recommend a tow truck. Since each check engine code has its own level of severity, it is difficult to predict how frequent miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy accordingly.

What Does the Check Engine Light Mean?

One of the most frequently misunderstood lights or indicators in your 2017 Ford Explorer is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in some different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a range of things for your 2017 Ford Explorer. Some of these include shifting automatic transmissions ignition timing, controlling engine speed, and implementing stability control, just to name various. With that being said, the check engine light can illustrate a collection of additional things. It can be as authentic as your gas cap being loose or as serious as engine knocking. If your check engine light is on in your 2017 Ford Explorer, contact Coggin Ford Jacksonville. Contact Coggin Ford Jacksonville today! Our Ford service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is twinkling.

2017 Ford Explorer Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that tiny light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear correct away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Explorer. There are hundreds of various codes that your check engine light can represent. While that sounds daunting, with a tiny patience, tackling crucial diagnostics will give you essential knowledge about your vehicle and will also allow that Check Engine Light to do what it is certainly supposed to do: be your guide. Regrettably, essential and satisfactory vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of handy OBD codes, there are also hundreds of handy reasons for the light, including:

  • O2 Sensor
  • Fuel and air metering systems problems
  • Emissions controls issues
  • Loose Gas Cap or Missing Gas Cap
  • Ignition system faults
  • Computer output circuit issues
  • Transmission issues
  • Bad Spark Plugs
  • Old Battery

This is why it is extraordinary for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Coggin Ford Jacksonville at 9047478996 today or schedule your check engine light service online today! If the engine light comes on due to a precarious concern, you risk destructive your car further by not repairing the issue humane away. When your check engine light comes on, you should get it checked out swiftly by a certified Ford mechanic.

2017 Ford Explorer Check Engine Light Flashing

Although there are countless capability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several classic causes comprising something as straightforward as a loose gas cap. Other classic reasons for a Check Engine Light are faulty head gasket, faulty emissions control part, damaged oxygen sensor, dirty mass airflow sensor, a malfunction with the fuel injection system, or defective spark plugs to name a bit. No matter what is the root cause of the Check Engine Light, we have the Ford Certified Technicians and the certified service protocol to isolate the root problem and repair it as necessary to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ford issue was serviced.

Every 2017 Ford Explorer was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its generous systems. The sensors are usually detecting conditions while sending data to the mechanical control unit. If the mechanical control unit detects that the data is out of factory specifications, the Check Engine Light flashes telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Coggin Ford Jacksonville provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service professional.