Please wait while the page loads...

Is it safe to drive your 2016 Ford F-250 with the check engine light on?

If the check engine light is shining, this means that there is a critical issue and it is recommended to service your Ford F-250 rapidly. This question is not incredibly accessible because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be protected to drive. This is naturally indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more extraordinary problem. Call the advisors at Coggin Ford Jacksonville by dialing 9047478996 so you can describe the issues. Or lower your speed and bring your 2016 Ford to our certified technicians as soon as conceivable.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we recommend that you pull over and contact Coggin Ford Jacksonville to help pick if your car is safe to drive in or if we recommend a tow truck. Since each check engine code has its own level of severity, it is vital to predict how many miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced.

2016 Ford F-250 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that microscopic light on your vehicle’s dashboard immediately brightens, but in reality, it is not something that should cause you to shut down in fear noble away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your F-250. There are hundreds of diverse codes that your check engine light can represent. While that sounds daunting, with a microscopic patience, tackling contractual diagnostics will give you contractual knowledge about your vehicle and will also allow that Check Engine Light to do what it is certainly supposed to do: be your guide. Sadly, unmistakable and contractual vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of conceivable OBD codes, there are also hundreds of conceivable reasons for the light, including:

  • Bad Spark Plugs
  • Old Battery
  • Emissions controls issues
  • Computer output circuit issues
  • Ignition system faults
  • O2 Sensor
  • Transmission issues
  • Fuel and air metering systems problems
  • Loose Gas Cap or Missing Gas Cap

This is why it is meaningful for someone who does not have assorted of automotive knowledge to not assume what a code means. Call Coggin Ford Jacksonville at 9047478996 now or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out abruptly by a certified Ford mechanic. If the engine light comes on due to a critical concern, you risk damaging your automobile further by not repairing the issue decent away.

What could cause the check engine light to come on in a 2016 Ford F-250?

When your check engine light comes on, this could be as effortless as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a harsh problem that could cause harsh break to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow typically means something less harsh but a flashing check engine light indicates that your vehicle’s engine is in harsh trouble and service is crucial immediately. If your check engine light is flashing in your 2016 Ford F-250, we incredibly endorse not to drive the vehicle and schedule Ford service today. Below is a list of the most favorite reasons your check engine light can come on:

  • Your 2016 Ford F-250 has a vacuum leak. Every Ford F-250 has a vacuum system that performs a extensive assortment of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to important heat or extreme fun.
  • New Spark Plugs or Plug Wires are imperative for your 2016 Ford F-250. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your car. This explosion is what moves the pistons and makes the engine run. The spark plug wires bring the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are detrimental or classic, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, large to more expensive repairs.
  • The battery is low or dead. The battery in your 2016 Ford F-250 is every decisive. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did some decades ago, and they don't surely require maintenance. The price of a new one depends on the type of Ford you drive, but check our current service coupons and specials.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or different item can wreak havoc on your 2016 Ford F-250 if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even avert the car from starting. If these issues sound present, bring your F-250 to Ford and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a scant bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your catalytic converter is detrimental or going detrimental. The catalytic converter is a part of your 2016 Ford F-250’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is frequently caused by neglected maintenance, which is why Coggin Ford Jacksonville offers a complimentary multi-point inspection with every Ford service. If you have an issue with your catalytic converter and don't get it repaired, your 2016 Ford F-250 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause different problems from overheating.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, modern as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your car will be less adequate when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2016 Ford F-250's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to mean the good mixture of air and fuel that enters the cylinders in your engine. A detrimental O2 sensor can also cause a car to fail an emissions test.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ford F-250 is what determines how much fuel is imperative to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to judicious changes, like altitude. If your Ford F-250 is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a detrimental mass airflow sensor.
  • One of the most present and frequent cause is that your 2016 Ford F-250 gas cap is loose, damaged or missing. The gas cap for your 2016 Ford F-250 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a detrimental fuel cap? If your gas cap is classic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on urgently after you put gas in your 2016 Ford F-250, first thing you should check is to make positive the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.

2016 Ford F-250 Check Engine Light

A flashing light suggests that the problem is alarming and if not taken care of immediately may result in great damage to the automobile. If the check engine light in your 2016 Ford F-250 starts flashing, that means that the problem needs abrupt attention and your Ford should be brought in immediately. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can immediately raise the temperature of the catalytic converter to a point where damage is attainable, requiring an fancy repair. Some owners ask if spark plugs cause the check engine light to flash? This can exclusively be the cause. A detrimental, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a highly fancy repair. If your check engine light is blinking, please contact our team of automotive mentors at Coggin Ford Jacksonville urgently by calling 9047478996.

2016 Ford F-250 Check Engine Light Flashing

Although there are innumerable attainable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are many regular causes comprising something as classic as a loose gas cap. Disparate regular reasons for a Check Engine Light are damaged oxygen sensor, dirty mass airflow sensor, faulty emissions control part, a malfunction with the fuel injection system, faulty head gasket, or defective spark plugs to name various. No matter what is the root cause of the Check Engine Light, we have the Ford Certified Technicians and the certified service protocol to isolate the root problem and repair it as fundamental to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ford issue was fixed.

Every 2016 Ford F-250 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its difficult systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what definitely is amiss nor what to do about it. That’s where we come in; Coggin Ford Jacksonville provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Exceptionally Qualified Service mechanical.

What Does the Check Engine Light Mean?

One of the most mostly misunderstood lights or indicators in your 2016 Ford F-250 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your automobile. Onboard computers increasingly have controlled and monitored automobile performance since the 80s and do a assortment of things for your 2016 Ford F-250. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name assorted. With that being said, the check engine light can illustrate a assortment of contrasting things. It can be as plain as your gas cap being loose or as active as engine knocking. If your check engine light is on in your 2016 Ford F-250, contact Coggin Ford Jacksonville. Contact Coggin Ford Jacksonville today! Our Ford service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing.

Will the check engine light reset itself?

The check engine light on your 2016 Ford F-250 will usually shut itself off if the issue or code that caused it to turn on is revamped. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 Ford F-250 light will go off after about 20-40 miles. If you drive over that reward and the light is still on, you will need to bring it in to Coggin Ford Jacksonville so the light and code can be double-checked and reset.

Check Engine Light Service 2016 Ford F-250

What do you do when you’re driving along in your Ford F-250 and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ford owners, your heart sinks a microscopic because you have microscopic idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2016 Ford F-250 checked as soon as convenient. Ignoring that warning could end up causing extraordinary damage to pricey engine elements.

When your 2016 Ford F-250's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t legal, a computer turns on your check engine light. This amber or yellow light is ordinarily labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is opt for with an electronic observe tool that is used by our Ford auto repair technicians at Coggin Ford Jacksonville. There are also a number of rather inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced high-tech to illustrate the issue and repair it.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is consistently between $88 and $111. The awesome news, Coggin Ford Jacksonville offers complimentary multi-point inspections and free diagnostics, in most cases, to help choose the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not subsequently tightened to a more serious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it awesome to get the suitable code reading and diagnosis.