Please wait while the page loads...

What could cause the check engine light to come on in a 2014 Ford Fusion?

When your check engine light comes on, this could be as conspicuous as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a dangerous problem that could cause dangerous damage to your engine and come with a excellent repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow continuously means something less dangerous but a shining check engine light expresses that your vehicle’s engine is in dangerous trouble and service is essential shortly. If your check engine light is shining in your 2014 Ford Fusion, we remarkably endorse not to drive the vehicle and schedule Ford service today. Below is a list of the most appreciative reasons your check engine light can come on:

  • New Spark Plugs or Plug Wires are fundamental for your 2014 Ford Fusion. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are damaging or traditional, you will experience poor performance and reduced power. In a bit extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, dominant to more lavish repairs.
  • Your 2014 Ford Fusion has a vacuum leak. Every Ford Fusion has a vacuum system that performs a wide collection of functions. The vacuum system also helps cut harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dehydrated out and crack, especially if they’re exposed to exciting heat or extreme chilly.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, accepted as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less compelling when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2014 Ford Fusion's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to opt for the honest mixture of air and fuel that enters the cylinders in your engine. A damaging O2 sensor can also cause a car to fail an emissions test.
  • Your catalytic converter is damaging or going damaging. The catalytic converter is a part of your 2014 Ford Fusion’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Coggin Ford Jacksonville offers a complimentary multi-point inspection with every Ford service. If you have an issue with your catalytic converter and don't get it revamped, your 2014 Ford Fusion will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause further problems from overheating.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or further item can wreak havoc on your 2014 Ford Fusion if it’s not installed perfectly. These aftermarket factors and accessories can deposit the battery, trigger the check engine light, or even stop the vehicle from starting. If these issues sound conscious, bring your Fusion to Ford and have our department of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM factors authentic place might cost a scant bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • The battery is low or dead. The battery in your 2014 Ford Fusion is every critical. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a bit decades ago, and they don't actually require maintenance. The value of a new one depends on the type of Ford you drive, but check our current service coupons and specials.
  • One of the most accepted and frequent cause is that your 2014 Ford Fusion gas cap is loose, damaged or missing. The gas cap for your 2014 Ford Fusion serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a damaging fuel cap? If your gas cap is traditional or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't lavish. If your check engine light turns on abruptly after you put gas in your 2014 Ford Fusion, authentic thing you should check is to make bold the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ford Fusion is what determines how much fuel is fundamental to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to evident changes, like altitude. If your Ford Fusion is having trouble starting, idling rough or has a agile change in the position of the throttle pedal, this could be a sign of a damaging mass airflow sensor.

2014 Ford Fusion Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that tiny light on your vehicle’s dashboard instantly flashes, but in reality, it is not something that should cause you to shut down in fear proper away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also cognizant as the OBD (on-board computer diagnostic system) in your Fusion. There are hundreds of diverse codes that your check engine light can represent. While that sounds daunting, with a tiny patience, tackling fundamental diagnostics will give you contractual knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, clear and contractual vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of feasible OBD codes, there are also hundreds of feasible reasons for the light, including:

  • Transmission issues
  • Bad Spark Plugs
  • Old Battery
  • Computer output circuit issues
  • Emissions controls issues
  • Ignition system faults
  • Loose Gas Cap or Missing Gas Cap
  • O2 Sensor
  • Fuel and air metering systems problems

This is why it is remarkable for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Coggin Ford Jacksonville at 9047478996 today or schedule your check engine light service online today! If the engine light comes on due to a draconian concern, you risk detrimental your car further by not repairing the issue equitable away. When your check engine light comes on, you should get it checked out suddenly by a certified Ford technician.

2014 Ford Fusion Check Engine Light Flashing

Although there are several ability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several typical causes including something as plain as a loose gas cap. Other typical reasons for a Check Engine Light are faulty emissions control part, dirty mass airflow sensor, faulty head gasket, a malfunction with the fuel injection system, damaged oxygen sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ford Certified Technicians and the certified service protocol to isolate the root problem and repair it as basic to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ford issue was fixed.

Every 2014 Ford Fusion was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its hard systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Coggin Ford Jacksonville provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Greatly Qualified Service experienced.

Check Engine Light Service 2014 Ford Fusion

What do you do when you’re driving along in your Ford Fusion and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ford owners, your heart sinks a microscopic because you have microscopic idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t indicate you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Ford Fusion checked as soon as potential. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2014 Ford Fusion's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t decent, a computer turns on your check engine light. This amber or yellow light is frequently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is learn with an electronic observe tool that is used by our Ford auto repair mechanics at Coggin Ford Jacksonville. There are also a number of somewhat inexpensive code readers that are designed for do-it-yourselfers, should you embrace that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to embrace the issue and repair it.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more risky failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it favorable to get the decent code reading and diagnosis. The average estimate for a check engine light diagnosis & testing is typically between $88 and $111. The favorable news, Coggin Ford Jacksonville offers complimentary multi-point inspections and free diagnostics, in most cases, to help opt for the cause of your check engine light.

2014 Ford Fusion Check Engine Light

If the check engine light in your 2014 Ford Fusion starts flashing, that means that the problem needs immediate attention and your Ford should be brought in expeditiously. A flashing light indicates that the problem is harsh and if not taken care of expeditiously may result in major damage to the vehicle. This twinkling light usually illustrates a rigorous engine misfire allowing unused fuel to be dumped into the exhaust system. There it can suddenly expand the temperature of the catalytic converter to a point where damage is achievable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can definitely be the cause. A bad, historic or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive consultants at Coggin Ford Jacksonville rapidly by calling 9047478996. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a excessively expensive repair.

Will the check engine light reset itself?

The check engine light on your 2014 Ford Fusion will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going steady, and you did a few of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Ford Fusion light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Coggin Ford Jacksonville so the light and code can be double-checked and reset.

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be changed. Since any check engine code has its own level of severity, it is difficult to predict how innumerable miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is flashing, we advise that you pull over and contact Coggin Ford Jacksonville to help designate if your vehicle is safe to drive in or if we advise a tow truck.

Is it safe to drive your 2014 Ford Fusion with the check engine light on?

This question is not very classic because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be functional to drive. This is customarily indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more precarious problem. If the check engine light is flashing, this means that there is a precarious issue and it is recommended to service your Ford Fusion immediately. Call the experts at Coggin Ford Jacksonville by dialing 9047478996 so you can describe the issues. Or reduce your speed and bring your 2014 Ford to our certified mechanics as soon as convenient.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2014 Ford Fusion is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a lot different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2014 Ford Fusion. Some of these include shifting automatic transmissions ignition timing, controlling engine speed, and implementing stability control, just to name several. With that being said, the check engine light can determine a variety of divergent things. It can be as simple as your gas cap being loose or as precarious as engine knocking. If your check engine light is on in your 2014 Ford Fusion, contact Coggin Ford Jacksonville. Our Ford service department can help you find out what code is turning your check engine light on or observe why your check engine light is flashing. Contact Coggin Ford Jacksonville today!