Please wait while the page loads...

2019 Ford Explorer Check Engine Light Flashing

Although there are countless attainable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are frequent accepted causes including something as real as a loose gas cap. Other accepted reasons for a Check Engine Light are damaged oxygen sensor, a malfunction with the fuel injection system, dirty mass airflow sensor, faulty emissions control part, faulty head gasket, or defective spark plugs to name numerous. No matter what is the root cause of the Check Engine Light, we have the Ford Certified Mechanics and the certified service protocol to isolate the root problem and repair it as mandatory to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ford issue was repaired.

Every 2019 Ford Explorer was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its basic systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what strictly is culpable nor what to do about it. That’s where we come in; Coggin Ford Jacksonville provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extraordinarily Qualified Service professional.

What Does the Check Engine Light Mean?

One of the most consistently misunderstood lights or indicators in your 2019 Ford Explorer is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in some countless ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light brightens in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2019 Ford Explorer. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name several. With that being said, the check engine light can mean a variety of contrasting things. It can be as prevailing as your gas cap being loose or as precarious as engine knocking. If your check engine light is on in your 2019 Ford Explorer, contact Coggin Ford Jacksonville. Contact Coggin Ford Jacksonville today! Our Ford service department can help you read what code is turning your check engine light on or diagnose why your check engine light is flashing.

2019 Ford Explorer Check Engine Light

A flashing light illustrates that the problem is hazardous and if not taken care of immediately may result in big damage to the vehicle. If the check engine light in your 2019 Ford Explorer starts flashing, that means that the problem needs immediate attention and your Ford should be brought in immediately. This shining light frequently expresses a severe engine misfire allowing unused fuel to be dumped into the exhaust system. There it can abruptly surge the temperature of the catalytic converter to a point where damage is accessible, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A bad, erstwhile or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is flashing, please contact our team of automotive mentors at Coggin Ford Jacksonville immediately by calling 9047478996.

Is it safe to drive your 2019 Ford Explorer with the check engine light on?

If the check engine light is glaring, this means that there is a unhealthy issue and it is recommended to service your Ford Explorer immediately. This question is not largely simple because it each depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be reliable to drive. This is customarily indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more unhealthy problem. Call the experts at Coggin Ford Jacksonville by dialing 9047478996 so you can describe the issues. Or reduce your speed and bring your 2019 Ford to our certified mechanics as soon as potential.

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy subsequently. If you check engine light is flashing, we endorse that you pull over and contact Coggin Ford Jacksonville to assist imply if your vehicle is protected to drive in or if we endorse a tow truck.

Will the check engine light reset itself?

The check engine light on your 2019 Ford Explorer will frequently shut itself off if the issue or code that caused it to turn on is repaired. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going productive, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2019 Ford Explorer light will go off after about 20-40 miles. If you commute over that payment and the light is still on, you will need to bring it in to Coggin Ford Jacksonville so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a 2019 Ford Explorer?

When your check engine light comes on, this could be as easy as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a risky problem that could cause risky damage to your engine and come with a excellent repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow normally means something less risky but a flashing check engine light hints that your vehicle’s engine is in risky trouble and service is mandatory shortly. If your check engine light is flashing in your 2019 Ford Explorer, we highly imply not to drive the vehicle and schedule Ford service straightaway. Below is a list of the most common reasons your check engine light can come on:

  • New Spark Plugs or Plug Wires are needed for your 2019 Ford Explorer. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are combative or traditional, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, big to more lavish repairs.
  • The battery is low or dead. The battery in your 2019 Ford Explorer is every accessible. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did many decades ago, and they don't precisely require maintenance. The price of a new one depends on the type of Ford you commute, but check our ongoing service coupons and specials.
  • One of the most beneficial and many cause is that your 2019 Ford Explorer gas cap is loose, damaged or missing. The gas cap for your 2019 Ford Explorer serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a combative fuel cap? If your gas cap is traditional or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't lavish. If your check engine light turns on immediately after you put gas in your 2019 Ford Explorer, first thing you should check is to make bold the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or contrasting item can wreak havoc on your 2019 Ford Explorer if it’s not installed properly. These aftermarket parts and accessories can dump the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound commonplace, bring your Explorer to Ford and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, exceedingly aftermarket parts and accessories, or using OEM parts first place might cost a tiny bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your mass airflow sensor (known as MAF) needs to be replenished. The mass airflow sensor in your Ford Explorer is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to important changes, like altitude. If your Ford Explorer is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a combative mass airflow sensor.
  • Your O2 Sensor (Oxygen Sensor) needs to be replenished. The Oxygen sensor, commonplace as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be fewer direct when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2019 Ford Explorer's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to hint the honorable mixture of air and fuel that enters the cylinders in your engine. A combative O2 sensor can also cause a car to fail an emissions test.
  • Your 2019 Ford Explorer has a vacuum leak. Every Ford Explorer has a vacuum system that performs a big variety of functions. The vacuum system also helps rebate harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, exceedingly if they’re exposed to mighty heat or extreme bitter.
  • Your catalytic converter is combative or going combative. The catalytic converter is a part of your 2019 Ford Explorer’s exhaust system. The catalytic converter's perform is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Coggin Ford Jacksonville offers a complimentary multi-point inspection with every Ford service. If you have an issue with your catalytic converter and don't get it repaired, your 2019 Ford Explorer will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause contrasting problems from overheating.

2019 Ford Explorer Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear polite away. If you hear the term, diagnostic trouble codes (DTC), these are just additional name for check engine light codes. These are automotive computer codes stored by the ECM, also ordinary as the OBD (on-board computer diagnostic system) in your Explorer. There are hundreds of divergent codes that your check engine light can represent. While that sounds daunting, with a few patience, tackling basic diagnostics will give you decent knowledge about your vehicle and will also allow that Check Engine Light to do what it is truly supposed to do: be your guide. Unfortunately, overt and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of possible OBD codes, there are also hundreds of possible reasons for the light, including:

  • Old Battery
  • Loose Gas Cap or Missing Gas Cap
  • O2 Sensor
  • Transmission issues
  • Ignition system faults
  • Computer output circuit issues
  • Emissions controls issues
  • Fuel and air metering systems problems
  • Bad Spark Plugs

This is why it is basic for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a hazardous concern, you risk damaging your car further by not repairing the issue honorable away. Call Coggin Ford Jacksonville at 9047478996 at this moment or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out suddenly by a certified Ford mechanic.

Check Engine Light Service 2019 Ford Explorer

What do you do when you’re driving along in your Ford Explorer and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ford owners, your heart sinks a scant because you have scant idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2019 Ford Explorer checked as soon as probable. Ignoring that warning could end up causing dominant damage to fancy engine components.

When your 2019 Ford Explorer's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t common, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Ford auto repair mechanics at Coggin Ford Jacksonville. There are also a number of comparably honorable code readers that are designed for do-it-yourselfers, should you embrace that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an professional compelling to influence the issue and repair it.

How much does it cost to get the engine light checked?

The intermediate cost for a check engine light diagnosis & testing is typically between $88 and $111. The great news, Coggin Ford Jacksonville offers complimentary multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not perfectly tightened to a more alarming failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it great to get the logical code reading and diagnosis.