Please wait while the page loads...

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more precarious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it excellent to get the proper code reading and diagnosis. The intermediate price for a check engine light diagnosis & testing is typically between $88 and $111. The excellent news, Coggin Ford Jacksonville offers complimentary multi-point inspections and free diagnostics, in most cases, to help embrace the cause of your check engine light.

2017 Ford Fusion Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear reasonable away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Fusion. There are hundreds of various codes that your check engine light can suggest. While that sounds daunting, with some patience, tackling needed diagnostics will give you advantageous knowledge about your car and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, agreeable and helpful car symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of likely OBD codes, there are also hundreds of likely reasons for the light, including:

  • Emissions controls issues
  • Old Battery
  • Transmission issues
  • Computer output circuit issues
  • Bad Spark Plugs
  • Ignition system faults
  • Loose Gas Cap or Missing Gas Cap
  • Fuel and air metering systems problems
  • O2 Sensor

This is why it is fundamental for someone who does not have frequent of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out promptly by a certified Ford technician. If the engine light comes on due to a precarious concern, you risk damaging your automobile further by not repairing the issue correct away. Call Coggin Ford Jacksonville at 9047478996 today or schedule your check engine light service online today!

What Does the Check Engine Light Mean?

One of the most consistently misunderstood lights or indicators in your 2017 Ford Fusion is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in numerous different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a mixture of things for your 2017 Ford Fusion. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of noticeable things. It can be as prevalent as your gas cap being loose or as alarming as engine knocking. If your check engine light is on in your 2017 Ford Fusion, contact Coggin Ford Jacksonville. Contact Coggin Ford Jacksonville today! Our Ford service department can help you learn what code is turning your check engine light on or diagnose why your check engine light is blinking.

2017 Ford Fusion Check Engine Light

If the check engine light in your 2017 Ford Fusion starts flashing, that means that the problem needs immediate attention and your Ford should be delivered in immediately. A flashing light indicates that the problem is serious and if not taken care of immediately may result in major damage to the vehicle. This blinking light normally indicates a draconian engine misfire allowing unburned fuel to be discarded into the exhaust system. There it can expeditiously hike the temperature of the catalytic converter to a point where damage is attainable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can explicitly be the cause. A destructive, former or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to commute, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very lavish repair. If your check engine light is flashing, please contact our team of automotive experts at Coggin Ford Jacksonville abruptly by calling 9047478996.

Check Engine Light Service 2017 Ford Fusion

What do you do when you’re driving along in your Ford Fusion and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ford owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the automobile over to the side of the road and call a tow truck, but it is recommended that you get your 2017 Ford Fusion checked as soon as practical. Ignoring that warning could end up causing humongous damage to expensive engine components.

When your 2017 Ford Fusion's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t suitable, a computer turns on your check engine light. This amber or yellow light is customarily labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic inspect tool that is used by our Ford auto repair mechanics at Coggin Ford Jacksonville. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you pick that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an trained professional to select the issue and repair it.

2017 Ford Fusion Check Engine Light Flashing

Although there are copious ability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several known causes including something as simple as a loose gas cap. Diverse known reasons for a Check Engine Light are faulty emissions control part, a malfunction with the fuel injection system, faulty head gasket, damaged oxygen sensor, dirty mass airflow sensor, or defective spark plugs to name a bit. No matter what is the root cause of the Check Engine Light, we have the Ford Certified Technicians and the certified service protocol to isolate the root problem and repair it as fundamental to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ford issue was fixed.

Every 2017 Ford Fusion was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its important systems. The sensors are commonly detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what precisely is wrong nor what to do about it. That’s where we come in; Coggin Ford Jacksonville provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Tremendously Qualified Service skilled.

What could cause the check engine light to come on in a 2017 Ford Fusion?

When your check engine light comes on, this could be as accepted as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a critical problem that could cause critical damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow ordinarily means something less critical but a flashing check engine light indicates that your vehicle’s engine is in critical trouble and service is essential immediately. If your check engine light is flashing in your 2017 Ford Fusion, we highly advise not to drive the vehicle and schedule Ford service today. Below is a list of the most prevailing reasons your check engine light can come on:

  • Your catalytic converter is detrimental or going detrimental. The catalytic converter is a part of your 2017 Ford Fusion’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Coggin Ford Jacksonville offers a complimentary multi-point inspection with every Ford service. If you have an issue with your catalytic converter and don't get it repaired, your 2017 Ford Fusion will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause back-up problems from overheating.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ford Fusion is what determines how much fuel is needed to run your engine efficiently by measuring the payment of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to genuine changes, like altitude. If your Ford Fusion is having trouble starting, idling rough or has a quick change in the position of the throttle pedal, this could be a sign of a detrimental mass airflow sensor.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or back-up item can wreak havoc on your 2017 Ford Fusion if it’s not installed well. These aftermarket parts and accessories can dump the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound prevalent, bring your Fusion to Ford and have our team of certified mechanics ensure that your aftermarket items were installed properly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could save you money from having to get poor function and wear and tear caused by poor installation function corrected.
  • The battery is low or dead. The battery in your 2017 Ford Fusion is every alluring. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a few decades ago, and they don't really require maintenance. The estimate of a new one depends on the type of Ford you travel to work, but check our present service coupons and specials.
  • New Spark Plugs or Plug Wires are needed for your 2017 Ford Fusion. The spark plugs are the part of your engine that ignites the air/fuel variety in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are detrimental or departed, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or wear and tear to ignition coils and O2 sensors, considerable to more expensive repairs.
  • One of the most prevalent and plentiful cause is that your 2017 Ford Fusion gas cap is loose, damaged or missing. The gas cap for your 2017 Ford Fusion serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a detrimental fuel cap? If your gas cap is departed or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on instantly after you put gas in your 2017 Ford Fusion, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the payment of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less adequate when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause wear and tear to your catalytic converter and your 2017 Ford Fusion's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to suggest the acceptable variety of air and fuel that enters the cylinders in your engine. A detrimental O2 sensor can also cause a vehicle to fail an emissions test.
  • Your 2017 Ford Fusion has a vacuum leak. Every Ford Fusion has a vacuum system that performs a wide variety of functions. The vacuum system also helps cut down harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to effective heat or extreme crisp.

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is difficult to predict how frequent miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replenished. If you check engine light is flashing, we endorse that you pull over and contact Coggin Ford Jacksonville to help favor if your vehicle is safe to drive in or if we endorse a tow truck.

Will the check engine light reset itself?

The check engine light on your 2017 Ford Fusion will typically shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going logical, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2017 Ford Fusion light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Coggin Ford Jacksonville so the light and code can be double-checked and reset.

Is it safe to drive your 2017 Ford Fusion with the check engine light on?

If the check engine light is flashing, this means that there is a severe issue and it is recommended to service your Ford Fusion suddenly. This question is not very clear because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to commute. This is normally indicated by a instinctive glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more harsh problem. Call the advisors at Coggin Ford Jacksonville by dialing 9047478996 so you can describe the issues. Or cut down your speed and bring your 2017 Ford to our certified mechanics as soon as possible.